REDASHE AEROSPACE EQUIPMENT

Redashe Ltd, Unit 8 Brook Trading Estate,

Deadbrook Lane, Aldershot,

Hampshire, GU12 4XB.

United Kingdom

CONTACT US BY TELEPHONE

Tel: +44 (0) 1252 785010

Fax: +44 (0) 1252 329328/329349

CONTACT US BY EMAIL

info@redashe.co.uk

The Redashe Aerospace Division distributes specialist equipment to the servicing and maintenance sectors of the aerospace market. Customers include: - British Airways Plc, Aer Lingus, Aerotechnica SA, Air Berlin PLC, Air Malta PLC, Bristow Helicopters Ltd, Monarch Airlines, Pakistan Airlines, Daimler Chrysler Aviation GmBH, Finnair OY, Lufthansa Technic AG, Martinair Holland NV, Spanair SA, Tyrolean Airways, Virgin Atlantic Airways, Marshall Aerospce, TNT Aircraft Maintenance Services, S.R.Technics Ltd, Westland Group Plc, M.O.D. (Royal Navy and Royal Air Force), United States Air Force. The Aerospace Division also supplies equipment to other specialist markets including Formula One Racing Teams. Distribution is primarily on a direct basis complimented by selected specialist distributors.

Included in Redashe’s extensive product portfolio is a range of superior quality greasing equipment and pumping equipment. All products are manufactured to the highest standard, and designed to give maximum performance, our Macnaught lubrication equipment range carries a full ten-year limited warranty against faulty manufacture, or bad workmanship. All Macnaught greasing and pumping products are fully serviceable; each product is supplied with full instructions on how to use the equipment correctly, a trouble-shooting information chart, and line diagrams showing the complete list of Macnaught spare parts, which are readily available. Products include single hand operated greasing and pumping equipment, air operated greasing equipment, general workshop equipment, hand tools, spray guns, fully ATEX approved spray gun cleaning machines, automatic parts washers.

Amongst the Specialist Lubrication Equipment supplied by Redashe is the NATO approved ACK2 Lubrication Accessory kit (NATO stock number 4930-01-105-9923) which, has been specifically designed for use with manual greasing equipment in the aviation industry. These specially designed aviation greasing adaptors give access to the many difficult to reach grease nipples found on aircraft. The kit contains, a right-angled needle coupler, a stubby right-angled coupler, 1 x 12” 45deg, 90deg, straight, and ‘J’ type needle couplers, rigid extension, ‘j’ needle coupler, 21” flexible extension, filler nozzle adaptor, standard coupler. All of these essential accessories are supplied in a heavy–duty carry case that has a specific slot for each accessory, which easily enables you to identify if any items are missing. Each of the items contained in the ACK2 greasing adaptor kit are also available separately for easy replacement.

Antistatic Equipment

NAS1650 - RJ20S Anti Static Spot Blaster

(Nato Approved Stock Number – 4A/4940-99-0516993)

Redashe gained initial experience in rust control in the automotive industry with a standard type spot blaster. An anti-static unit was specially adapted to cope with the demands of aircraft corrosion. The Anti-Static Spot Blaster is totally powered by compressed air, the system is a closed loop system and was developed in close cooperation with the RAF. Easily portable the anti-static spot blaster can be used in the majority of areas, even the most difficult to get to, like the inside of wings. The system is fitted with an air regulator to give strict control of the blasting pressure, which ensures no damage to the panel. All traces of oxidization are removed safely and cleanly by the oxidization Spot Blaster. If necessary, the spot blaster can also be used to remove paint from minor areas on metal, and composite materials, leaving a totally clean etched surface for superior adhesion. Once an area is totally clean from spot blasting it is possible to identify deeper corrosion and weakness in metal surfaces, unlike conventional methods. The Redashe Anti-Static Spot Blaster works by mixing compressed air with blasting materiel, which is fired out of a very tough, long lasting Tungsten Carbide nozzle, which directs the media to the surface requiring treatment. A selection of flexible rubber nozzles matches the surface contours to prevent dust leakage.

The used media is recycled and pulled back by an inbuilt air mover, all waste material is removed to a dust bag. Special anti – static hoses and earth cables are fitted to the spot blaster to reduce the amount of potentially dangerous static electricity. This obviates the risk of explosion where flammable solvents and fuel are present. All blasting media is recycled and cleaned within the unit. Ferrous particles are removed with a magnetic separator. Fine glass beads are employed for light surface corrosion removal and general polishing; aluminium oxide is used for heavier intergranular corrosion on aluminium or corrosion on ferrous fasteners. MoD and Nato approved, the Redashe Anti-Static Spot Blaster is already in airline service with such operators as British Airways, Quantas and BMI. Units are also extensively used by the RAF, RNAS and elsewhere. The Spot Blaster is employed by several leading vintage aircraft restoration companies, the Marine Builders Training Trust, and Formula One racing teams.
Applications for this specialist equipment also extend to offshore oilrigs for cleaning stainless steel welds. The Redashe Anti-Static Spot Blaster is lightweight and compact, easy to use and represents a highly cost-effective investment for easily and efficiently removing the curse of corrosion and doing this essential task both simply and effectively.

SALES AND TECHNICAL SUPPORT

Our technical support team is ready to assist you with any element of your enquiry. With have many years of experience and can confidently recommend the best product for your particular application. If the precise item you need is not available please contact us with your specific requirements. Special purpose and custom-built products are available for many applications not shown in this catalogue.
Redashe is continuously seeking and evaluating new products, which compliment and expand their current ranges. In addition, the Company seeks to maintain and strengthen its position by sourcing new distributors for its products both in existing and new markets.

Redashe Limited has a policy of maintaining and promoting its reputation with its distributors and customers for quality, promptness and an economic price for products supplied. This policy is supported by a company quality system developed by the management team at Redashe Limited which meets the requirements of BS EN ISO 9001:2000 - Updated 2003. Certification of the system was obtained by BSI Quality Assurance on 9th December 1991, Number RS13732.